Základné poskladanie
Ako poskladať stroj po vybalení: pištoľ, vysokotlaková hadica, tryska s motýlikom a nasávanie.
High-pressure airless paint sprayers for professionals and skilled DIYers. Spray walls, ceilings, façades, fences or radiators quickly, evenly and with minimal mess.
The sprayer is made for fast painting of walls, ceilings, wooden structures and metal surfaces – emulsions, latex, acrylics, enamels, water-based varnishes, anti-corrosion and fire-retardant coatings.
A thin, even coat without waste – you use less paint than with a roller or brush.
The suction hose with its strainer goes straight into the bucket or the original paint can – no decanting.
Walls, ceilings, doors, furniture, railings or garages. The 15 m hose gives a long reach without moving the machine.
A compact machine with a carrying handle and stepless pressure control. Easy to clean and maintain.
Everything brand new, straight from the manufacturer under our own registered brand. In-warranty and post-warranty service.
We will show you operation, cleaning and maintenance right at our premises. A Slovak manual and video guides are included.
A compact airless sprayer with a piston pump, direct suction and stepless pressure control – everything you need to start spraying.
| Power supply | 230 V, 16 A circuit breaker |
|---|---|
| Motor | 1800 W DC motor |
| Pump | piston pump |
| Maximum pressure | 200 bar, steplessly adjustable |
| Flow rate | 2–3 l/min |
| Machine weight | 13 kg |
| Tip included | 517 |
| High-pressure hose | 15 m |
| Extension pole | 50 cm |
| Suction | straight from the bucket, stainless strainer |
| Manual | in Slovak + video guides |
With every complete sprayer you get lubricating oil, a filter, open-end spanners, a seal, PTFE tape and cleaning brushes.
While stocks last.
We stock every part of the machine. Click a number on the picture or choose a part from the list.
1Spray gun
2Gun filter
3Extension pole 50 cm
4Tip 517
5Tip guard
6High-pressure hose 15 m
7Suction hose
8Suction filter
9Prime / relief valve
10Outlet valve
11Piston
The tip number tells you the fan width and the orifice size. Then pick the gun filter to suit the material.
517 – first digit × 2 = fan width in inches at 30 cm (12″) from the wall
517 – last two digits = orifice diameter in thousandths of an inch
Example: a 517 tip sprays a fan about 10″ (25 cm) wide and has a 0.017″ (0.43 mm) orifice. A larger orifice = thicker paint and higher flow.
| Tip | Angle | Fan width | Orifice | Suitable for |
|---|---|---|---|---|
| 209 | 20° | 10–15 cm | 0.009″ · 0.23 mm | narrow areas, trims, railings; stains and varnishes |
| 211 | 0.011″ · 0.28 mm | |||
| 215 | 0.015″ · 0.38 mm | |||
| 311 | 30° | 15–20 cm | 0.011″ · 0.28 mm | doors, frames, furniture; varnishes and enamels |
| 313 | 0.013″ · 0.33 mm | |||
| 315 | 0.015″ · 0.38 mm | |||
| 413 | 40° | 20–25 cm | 0.013″ · 0.33 mm | radiators, fences, metal structures; alkyd and acrylic paints |
| 415 | 0.015″ · 0.38 mm | |||
| 417 | 0.017″ · 0.43 mm | |||
| 515 | 50° | 25–30 cm | 0.015″ · 0.38 mm | walls and ceilings; emulsion and latex paints (517 is included) |
| 517 | 0.017″ · 0.43 mm | |||
| 519 | 0.019″ · 0.48 mm | |||
| 619 | 60° | 30–35 cm | 0.019″ · 0.48 mm | large areas and façades; thicker paints and fillers |
| 621 | 0.021″ · 0.53 mm | |||
| 623 | 0.023″ · 0.58 mm |
| Mesh | Material |
|---|---|
| 30 | very thick materials – fillers and elastomeric coatings (tips from 0.023″) |
| 60 | emulsion, latex and façade paints (tips 0.017–0.021″) |
| 100 | alkyd paints, enamels and primers (tips 0.013–0.017″) |
| 150 | varnishes and fine-finish enamels (tips 0.011–0.013″) |
| 200 | stains, wood dyes and clear lacquers (tips up to 0.011″) |
The higher the mesh number, the finer the screen. The filter should catch debris before it clogs the tip – so use a finer filter with a fine tip.
Step by step from basic assembly to replacing the seals, piston and valves.
Ako poskladať stroj po vybalení: pištoľ, vysokotlaková hadica, tryska s motýlikom a nasávanie.
Postup rozobratia čerpadlovej časti pred údržbou alebo výmenou dielov.
Ako bezpečne vybrať piest z čerpadla.
Výmena tesnení piestu krok za krokom – najčastejšia údržba airless čerpadla.
Montáž nového piestu do čerpadla.
Spätná montáž čerpadla po výmene tesnení alebo piestu.
Ako vymontovať ventil z čerpadla.
Montáž nového ventilu a kontrola tesnosti.
The YouTube player (youtube-nocookie.com) loads only after you click a video. YouTube may then process data under its own policies.
We repair and adjust your paint sprayer. Spare parts are in stock, so a repair doesn't take weeks.
Diagnostics, cleaning and adjustment of the piston pump and pressure control.
New piston seals restore full pressure and stop paint leaks.
Replacing the outlet and prime valve when the machine won't prime or hold pressure.
We replace a worn piston with a new one – the part is always in stock.
We also repair machines out of warranty, quickly and at a fair price.
Free advice on choosing a tip and filter, thinning paint and maintenance.
About us
For several years we have been selling airless paint sprayers to a wide range of customers – from painters and building companies to skilled DIYers. We aim to supply only proven quality at low prices.
We can advise you, arrange service and maintenance, and we keep every spare part in stock. Our machines come straight from the manufacturer under our own registered brand (trademark No. 257570).
Average 5.0 / 5 from 2 reviews.
„great advice and delivery within 24 hours"
„very fast delivery and satisfaction"
Practical articles on airless spraying, choosing a tip, thinning paint, cleaning and machine maintenance.
The machine meets the requirements of the Machinery Directive 2006/42/EC, the Low Voltage Directive 2014/35/EU and the EMC Directive 2014/30/EU.
Plumbing work, service and reconstruction of plumbing, underfloor and solar heating.
www.tempera.skComprehensive reconstructions, insulation, facades, turnkey house construction, tiling, custom-made furniture and painting services.
www.toseli.skConstruction activities, insulation, facade modifications, tiling, reconstruction and turnkey house construction.
www.vyva.skComprehensive construction services including consulting before and during implementation, emphasis on quality materials and trained workers.
www.lstherm.skHeat presses, cutting plotters, CNC and CO2 engraving machines, printers and accessories for sublimation and printing.
www.obchodzeu.skAutomatic self-leveling rotating lasers, accessories, service and calibration.
www.rotacnelasery.skDiesel heaters - independent heating for cars, vans, motorhomes, workshops and cottages.
www.bufiky.skWe'll help you choose a machine or tip and with repairs. Personal pick-up in Švábovce near Poprad – any time by phone arrangement.